资料详情

某公路边坡支护设计论文+计算书+cad图纸+施工组织设计

头像

土木工程

编号:9458

目录

摘要 1

第一篇 边坡方案设计 3

第一章  绪论 3

1.1 本课题研究的历史、现状和发展情况 3

1.2  几种常见支护手段的分析 5

第二章  工程简介 9

2.1 工程概况 9

2.2 工程地质条件 9

2.3 岩土体工程地质特征 10

第三章  边坡稳定性计算 11

3.1 边坡剖面选取 11

3.2 条块划分 13

3.3 计算公式 13

3.4 计算参数取值 13

3.5 计算过程 13

3.6 计算结果及结果分析 13

第四章  边坡治理工程设计 13

4.1设计依据及设计原则 13

4.2 设计原则与设计思路 13

4.3 抗滑桩设计计算 13

4.4 边坡排水设计 13

第二篇 施工组织设计 13

第五章  施工组织设计依据 13

5.1 技术设计资料 13

5.2 施工技术规范规程 13

第六章  施工技术 13

6.1 施工准备及平面布置 13

第七章  施工质量及其控制标准 13

7.1工程质量执行标准 13

7.2 质量要求及质量保证措施 13

第八章  边坡监测与信息化施工 13

8.1 边坡监测 13

8.2信息化施工措施 13

参考文献 13

附件 13


摘要

随着工程技术的不断发展,在实际的道路工程和建筑工程中涉及到大量的边坡问题,因而对边坡工程的处理是一项重要的内容。根据不同的边坡破坏形式,边坡的治理应采取不同的计算方法与治理措施。目前治理公路高陡边坡的措施有SNS柔性防护技术、喷锚网支护技术、抗滑桩墙体系等支挡结构。抗滑桩支护是加固治理滑坡的一种行之有效的方法,它施工简便、快速、加固效果好,己经在世界各国的滑坡治理中得到比较广泛的应用。

本设计是以在重庆市城口至万源快速公路通道第CW12合同段K0+000~K0+500段边坡的工程地质勘察报告资料为基础,结合本科所学的理论知识以及导师的指导建议,根据相关书籍和规范来完成的。本设计首先对边坡进行稳定性分析,判定该边坡的稳定程度,再根据工程勘察报告和相关资料,进行了抗滑桩的设计计算,得出了本工程的设计结果。设计还进行了详实的施工组织设计,制定出了一个比较合理、科学的施工方案。

关键词:边坡稳定性分析,公路滑坡防治,抗滑桩

Abstract:With the continuous development of engineering technology, in the actual road and construction works related to a lot of slope problems, so how to deal with the Slope engineering is an important content. According to different Failure modes of the slope, the slope of governance should be taken to the different methods of calculation and control measures. Measures of governance highway steep slope include the SNS flexible protection technology, puffanchor support tecthnology, anti-slide pile wall system retaining structures,and so on. Stabilizing piles supporting is an effective method of Landslide treatment which is simple, fast, good reinforcement effect for construction, It has already been widely used to deal with Landslide in the world.

The design is based on engineering geological investigation report information in theCW12 contract segment of Chongqing City Chengkou to Wangyuan expressways channel ,slope of K56 +600 ~ K56 +800 .Use the theoretical knowledge as well as recommendations for the guidance of instructors, according to the books and norms. The design′s first job is to analyse stability of the slope to determine the stability of the slope, and then ,according to the engineering investigation report and related information to design Friction Pile and obtained the results of the engineering design. The design also carried out a detailed construction design, worked out a rational, scientific construction program.

Key words : Slope stability analysis, highway landslide prevention, anti-slide pile